Products in Composite Materials: Molding Compound

GMTex® is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

Plenco® 01530 is a glass and mineral-reinforced pelletized polyester molding compound, offering improved mechanical strength properties along with excellent electrical properties and dimensional stability. UL recognized under component file E40654. 01530 is available in black.

Plenco® 07579 is a fast curing, woodflour filled, novolac phenolic molding compound, formulated for industrial applications that do not require a smooth finish. UL recognized under component file E40654. 07579 is available in black.

Plenco® 04309 is a heat resistant, glass-reinforced phenolic molding compound offering improved mechanical strength and electrical strength properties. UL recognized under component file E40654. 04309 is available in black.

Cuyahoga Plastics EB5000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms, and box length extrusions.

Plenco® 03303 is a mineral and flock-filled phenolic molding compound offering excellent electrical insulating properties. UL recognized under file E40654. 03303 is available in black.

Plenco® 04466 is a heat resistant, mineral and flock filled phenolic molding compound, offering excellent mechanical strength and cosmetic properties. UL recognized under component file E40654. 04466 is available in black.

Plenco® 07552 is a glass fiber reinforced novolac phenolic molding compound, exhibiting superior dimensional stability, good impact strength, and good electrical properties. Type ASTM 5948 MFH. UL recognized under component file E40654. 07552 is available in black.

Plenco® 08218 is an 18% glass-filled polyester bulk molding compound characterized as an electrical grade, but has many outstanding properties that make it suitable for a broad range of applications because of its excellent electrical resistance and mechanical strength. Customers have found this material useful for commercial/industrial heavy duty electrical parts, enclosures for power distribution equipment, fuse holders, circuit breaker cases, electric motor housings and components. It is available in bulk or extruded form and colors upon request. It is UL recognized under file E40654.

Cuyahoga Plastics AB4000 is a mineral-filled, glass fiber reinforced polyester thermoset suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms & box length extrusions.

Plenco® 02311 is a versatile general purpose organic filled phenolic molding compound offering excellent mold processability and optimized cure cycles. Plenco® 02311 is also granulated to provide improved pourability characteristics for cold powder compression molding. UL recognized under component file E40654. 02311 is available in black color.

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

Plenco® 04527 is a heat resistant, mineral and flock filled phenolic molding compound, offering excellent mechanical strength, and resistance to cracking in a wet-dry environment. UL recognized under component file E40654. 04527 is available in black.

Plenco® 07021 is impact grade phenolic molding compound. Customers have found this material useful for switchgear parts, or where mechanical assembly requires better impact strength. Plenco® 07021 is UL recognized under component file E40654. 07021 is available in black.

Plenco® 07591 is a mineral and flock cotton filled novolac phenolic molding compound. UL recognized under component file E40654. 07591 is available in black.

Cuyahoga Plastics S-4021 is a glass, mineral & graphite filled Silicone Thermoset molding compound specifically designed for contact components in the hot glass handling industry.

Plenco® 05118 is a mineral and graphite filled phenolic molding compound. Customers have found this material useful for bearing seals. 05118 provides for a low coefficient of friction, abrasion resistance, minimal water absorption, and excellent dimensional stability under severe exposure. 05118 is available in gray. 05118 is not recommended for electrical insulating applications.

Plenco® 02482 is a general purpose, organic filled phenolic molding compound offering excellent mechanical strength while maintaining dielectric properties at elevated humidity levels. UL recognized under component file E40654. 02482 is available in black.

Plenco® 00714 is a melamine-phenolic copolymer molding compound, offering excellent arc resistance and comparative track index values. UL recognized under component file E40654. 00714 is available in brown. 00714 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) Type CMG and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 05482 is an organic reinforced phenolic molding compound formulated with graphite to improve the abrasion resistance. 05482 is available in black and brown. 05482 is not recommended for electrical insulating applications.

Plenco® 06310 is a glass and mineral filled phenolic molding compound offering excellent heat resistance and dimensional stability. 06310 is available in black.

Plenco® 03554 is an organic reinforced phenolic molding compound modified with PTFE to offer improved coefficient of friction values. 03554 is available in black. It is UL listed. 03554 is a re-number of 06554 formulation.

Plenco® 07307 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength properties. UL recognized under component file E40654. 07307 is available in black. 07307 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CFG and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 02000 is a versatile general purpose, organic filled phenolic molding compound, offering optimum cure characteristics and an excellent balance of molding properties. UL recognized under component file E40654. 02000 is available in black.

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Cuyahoga Plastics AB9500 is a high strength and high heat resistant, glass fiber reinforced thermoset molding compound. It is currently supplied in bulk form only.

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.

Plenco® 07200 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength, good powder properties and excellent cosmetic properties. UL recognized under component file E40654. 07200 is available in black.

Plenco® 04485 is a mineral filled phenolic molding compound offering excellent heat resistance, electrical resistance, and dimensional stability. UL recognized under component file E40654. 04485 is available in black.

Plenco® 08112 is a general purpose polyester bulk molding compound that is characterized by adding utility to a number of applications. Because of its combination of high heat resistance, good electrical properties and strength. Customers have found this material useful for such applications as iron skirts and other small appliance housings, coil bobbins, and electric motor components such as brush holders. It is available in either bulk or extruded form. Colors are available upon request. It is UL recognized under file E40654.

Plenco® 05488 is a woodflour and graphite filled phenolic molding compound offering improved abrasion resistance. UL recognized under component file E40654. 05488 is available in brown. 05488 is not recommended for electrical insulating applications.

Plenco® 01586 is a glass and mineral-reinforced pelletized polyester molding compound offering excellent heat resistance and mechanical strength properties. Customers have found this material useful for injection molded electrical appliance components. UL recognized under component file E40654. 01586 is available in gray color.

Plenco® 07202 is an organic fiber reinforced phenolic molding compound, formulated to offer improved mechanical strength properties with an industrial finish. UL recognized under component file E40654. 07202 is available in black.

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.