Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Cleaning Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- HII Features
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Use Level
- 0.5% (powder detergent), 0.02 - 0.1% (slurry deaeration), 0.2 - 0.6% (structured liquid detergent)
- Applications
Antifoams for Household & Cleaning
- Application Details
SILFOAM® SC 124 is added to laundry detergents by the following methods and for the following purposes:
- Deaerating slurries: To remove gasses from a detergent slurry, and optimize slurry transfer from the feed tank to the spray tower, SILFOAM® SC 124 is added to the slurry batch to achieve good deaeration in general.
- Suppressing foam in powder detergents: In the preparation of low-foam detergents, 5-10% SILFOAM® SC 124 is adsorbed onto a powdery carrier. 2-4% of this premix is added to the finished detergent to obtain good foam suppression.
- Foaming of structured liquid detergents can also be suppressed by the addition of SILFOAM® SC 124. If SILFOAM® SC 124 is not sufficiently compatible, we can recommend specialty products.
Processing- SILFOAM® SC 124 is added directly to the slurry in the feed tank at the end of the slurry degassing process to suppress the foam and also deaerate the slurry in the intermediate tank.
- To regulate foaming in laundry detergents, SILFOAM® SC 124 is usually incorporated (in an amount of 5-10%) into a powdery premix and the latter is then mixed into the powder detergent at the end of the manufacturing process (amount required: 2-4% premix).
- The foaming of filled and structured liquid detergents can be regulated by admixing SILFOAM® SC 124.
Properties
- Physical Form
- Appearance
- Opaque colorless oily
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Ingredients | 100 | % | — |
| Density (at 25°C) | approx. 1 | g/cm³ | DIN 51757 |
| Dynamic Viscosity (at 25°C, Brookfield, spindle 2, 2.5 rpm) | approx. (2000 - 6000) | mPa·s | Brookfield |
| Refractive Index (at 25°C) | approx. (1.4 - 1.41) | — | DIN 51423 |
Packaging & Availability
- Country Availability
- Regional Availability