Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Specific Features
- Crosslinker
- Emulsions
Applications & Uses
- Compatible Polymers & Resins
- Coating Type
- Applications
Release Coatings
- Application Details
WACKER® CROSSLINKER V 15 is compounded with Silicone Catalyst Emulsions and Dehesive® Emulsions. It is used to produce release liners especially on filmic substrates.
Processing
Before use, stir thoroughly.
- Prepare the water quantity in a clean container while stirring slowly.
- Add the Dehesive(R) polymer or polymer/crosslinker emulsion directly to the tank and mix at moderate shear.
- In a next step add the crosslinker emulsion and continue mixing moderately. 4. Add the Catalyst–EM in the last step and mix at moderate shear to achieve a homogeneous bath.
- Please take care of perfect homogenization while adding the Catalyst-EM . Avoid local concentration peaks and catalyst poisons.
Properties
- Physical Form
- Typical Properties
- Properties
- Fast curing properties
- Easy mixing and metering
- Good release stability
- Good bath life
- Very good wetting properties
- Suitable for especially filmic substrates
| Value | Units | Test Method / Conditions | |
| Density (at 20°C) | 1 | g/cm³ | DIN 51757 |
| Solid Content | 38 | % | — |
Safety & Health
- Safety Notes
Siloxane Crosslinker Emulsions should never get into direct contact with concentrated Siloxane Catalyst Emuslions or Alkaline Systems, since this may cause a spontaneous, uncontrolled emission of hydrogen. The formation of hydrogen might lead together with air to explosive mixtures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Store in a dry and cool place. Silicone emulsions are not freeze/thaw stable!