Products

BRUGGOLEN® TP-H1805 - High Heat Stabil­izer for Aliphatic Poly­amides above 200°C. It is a granular form heat stabilizer package with synergists. Powerful long-term protection of aliphatic polyamides at very high temperatures: PA6 up to 200°C, PA6.6 up to 230°C: tensile strength retention >50% for 3000 h at 200°C no activation required easy processing during compounding upgrades aliphatic polyamides to the performance range of high temperature nylons

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

BRUGGOLEN® TP-H1802 is a mixture of secondary aromatic amine-based antioxidants and co-stabilizers in powder form. It provides protection of polyamides against hot oils, fats, and glycols and has the following features: Good long-term stabilization Characteristic brownish-translucent discoloration Not CMR classified, free of DPPD

BRUGGOLEN TP-R2162 is a novel stabilizer package based on partially renewable raw materials for upcycling polyethylene post-industrial and post-consumer waste streams. This product is available in low dust compacted granular product form.Features: Higher quality recyclates via a novel chemical system Enhanced initial mechanical strength of extruded PE films Improved process stability

BRUGGOLEN® TP-H1804 is a copper-based heat stabilizer package with synergists for use in aliphatic polyamides. This product is available in granular form. It is a very effective protection agent and antioxidant against premature fatigue of the mechanical properties and embrittlement of the finished parts under long-term stress, both in unreinforced and glass-fiber reinforced or mineral-filled aliphatic polyamides up to 190°C.

BRUGGOLEN® TP-H2217 is a halogen and metal-free heat stabilizer for aliphatic polyamides in a polymeric granular product form It is suitable for polyamides in E&E applications. It has exceptional features: Improved retention of mechanical performance under heat compared to standard phosphite/phenolic based stabilizers Tensile strength retention of at least 50% for 2500h at 150°C Maintains comparative tracking index (CTI) up to 600V Allows E&E applications at elevated temperatures TP-H2217 has no influence on flame retardancy: UL94 V-0

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

Bruggemann Reducing Agent TP 1651 is a formaldehyde-free reducing agent that enables solutions for the latest technical challenges of environmental awareness, rising quality demands, and improved application performance.Our products and techniques enable emulsion polymer producers to improve efficiency with more sustainable raw materials. All offer the following attributes:Formaldehyde and VOC freeIncreased reactivity – better performance at lower dosage and timeLow to zero residual free monomer levelFDA Direct Food Contact approvalTP 1651 is a new formaldehyde free grade with wide pH and temperature range. It demonstrates excellent performance in styrene acrylate emulsion polymers and better performance with hydrophobic monomers such as 2-EHA and Butyl Acrylate.

BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste

BRUGGOLEN® P22 is a highly efficient nucleating agent for polyamides. The addition of Bruggolen® P22 to the polymer melt leads to fine particles which induce a very fine and homogeneous crystalline structure.FeaturesIncreases crystallinityReduces cycle time during injection moldingImproves dimensional stability - significant reduction of warping in GF-reinforced compoundsImproves mechanical properties (tensile strength, stiffness, flexural modulus, etc.)Increases heat distortion temperatureNon-volatile; non-extractable

Bruggemann Reducing Agent TP 1853 is a formaldehyde-free reducing agent that enables solutions for the latest technical challenges of environmental awareness, rising quality demands, and improved application performance.Our products and techniques enable emulsion polymer producers to improve efficiency with more sustainable raw materials. All offer the following attributes:Formaldehyde and VOC freeIncreased reactivity – better performance at lower dosage and timeLow to zero residual free monomer levelNon yellowingFDA Direct Food Contact approvalTP 1853 is a new formaldehyde free grade with wide pH and temperature range. It offers improved performance in vinyl acetate emulsion polymers.

Zinc Oxide RAC by Brüggemann is a type of active zinc oxide that is produced through a special precipitation process. It is suitable for use in the vulcanization of a variety of rubber types, including:Natural rubber (NR)Styrene-butadiene rubber (SBR)Isoprene rubber (IR)Nitrile rubber (NBR)The product has excellent vulcanization properties due to its gentle thermal treatment and chemical origin. It is known for its high specific surface area, which enables it to provide excellent mechanical properties even when used in smaller amounts compared to traditional zinc oxides. Zinc Oxide RAC has a shelf life of 12 months.

BRUGGOLEN® H320 is a synergistic mixture of copper compounds, halides, and lubricants in powder form. This copper, salt-based antioxidant is in the form of powder and it provides excellent long-term protection of polyamides against embrittlement, powerful protection against premature fatigue and high temperatures up to 180°C.Features: Powerful long-term protection Excellent quality and homogeneity via specific production know-howCharacteristic:Bluish or greenish discoloration after conditioning

BRUGGOLEN® H325 is a synergistic composition of cuprous and halogen compounds along with an effective lubricant in the form of compacted granules. It is a very effective antioxidant and is a heat-aging protection agent for use in unfilled and glass-reinforced polyamides.

BRUGGOLEN® H324 is a heat stabilizer and antioxidant which protects high performance polyamides, preserving strength, stiffness, and dimensional stability from damage caused by heat, weather etc.It is a copper iodide based heat stabilizer /antioxidant specially suited for filled and unfilled polyamides. After conditioning of the polyamide BRUGGOLEN® H324 generates a typical discoloration known from copper iodide based antioxidants.Features:Powerful long-term protectionExcellent quality and homogeneity via specific production know-howCharacteristic:Bluish or greenish discoloration after conditioning

BRUGGOLEN® H321 is a blend of copper compounds, halides, and lubricants in the form of compacted granules. It neutralizes the harmful effects of high temperatures on polyamides. It is a classic copper, salt-based heat stabilizer that works to a temperature of 180°C by reacting with the degradation products that are formed during thermal processing or exposure to high temperatures, neutralizing their harmful effects and helping to preserve the integrity of the polymer.

BRUGGOLEN® P252 is a synergistic mixture of various nucleating and lubricating substances. It is our highly-efficient nucleating agent for polyesters. Reduction of cycle time during injection molding Improved dimensional stability - significant reduction of warping in GD-reinforced compounds Improves mechanical properties (tensile strength, stiffness, etc.) Increases heat distortion temperature Non-volatile Non-extractable

Brueggemann TP 1862 is a combination of novolak-based resin along with a zinc-based catalyzing additive that additionally allows the elimination of cobalt and cobalt salts from steel-cord adhesion mixtures without sacrificing vulcanization activity, mechanical properties, and adhesion characteristics.Removing cobalt and resorcinol from adhesion mixturesSteel-cord adhesion mixtures are commonly used in tires and other applications such as hoses or conveyor belts.In such mixtures, state-of-the-art technology uses systems containing cobalt salts as catalysts or co-accelerators and adhesion promotors, as well as resorcinol resins to achieve desired mechanical properties. As both cobalt and cobalt salts, on one hand, and resorcinol, or resorcinol-based resins, on the other hand, are deemed to be problematic from an environmental safety and health (ESH) point of view, it is worthwhile finding a solution to reduce or even eliminate such critical substances from modern rubber mixtures. The elimination of resorcinol is already realized by a novolak-based reinforcing resin. Highlights of TP 1862:No cobaltNo resorcinolHigh adhesion to steelHigh mechanical propertiesLow zinc and heavy metal content

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

BRUGGOLEN® H10 is a very efficient processing stabilizer which protects polyamides against degradation and discoloration during processing caused by shear and thermal stress.Features:Reduced yellowing during melt processingProtection against discoloration after aging by heat and by UV lightNon-volatilityResistance against hydrolysisEspecially suited for glass-fiber reinforced polyamides