Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
- Heat resistant
- High rebound resilience
- Ultra-low compression set
Applications & Uses
- Cure Method
- Plastics & Elastomers End Uses
- Applications
General Automotive Parts
- Application Details
- ELASTOSIL® R 862/60 OH is a peroxide curing high consistency silicone rubber suitable for the manufacture of molded articles like gaskets and bellows. Vulcanizates provide excellent heat stability by adding appropriate heat stabilizers, such as 1,5% ELASTOSIL® AUX Stabilizer H3 or 3% ELASTOSIL® AUX Stabilizer H1.
- To obtain optimum compression set values it is advisable to post-cure articles made of ELASTOSIL® R 862/60 OH for 4 hours at 200°C.
Processing
- The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.
Properties
- Heat Resistance Properties
- Cured Properties
- Properties
- ELASTOSIL® R 862/60 is a heat resistant peroxide-curing silicone rubber.
- The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.
- Note
- Cure conditions: 0.7 % ELASTOSIL® AUX Crosslinker C1 (Dicumylperoxide), 15 min / 165 °C in press, post-cured 4 h / 200 °C for cured properties.
- Heat Resistance Conditions: Heat stabilized with 1,5 % ELASTOSIL® AUX Stabilizer H3, post-cured 4 h / 200 °C.
Value | Units | Test Method / Conditions | |
Elongation (at break, After heat aging 168 hours, 250°C) | 240 | % | ISO 37 |
Shore Hardness A (After heat aging 168 hours, 250 °C) | 66 | — | DIN ISO 48-4 |
Tensile Strength (After heat aging 168 hours, at 250°C) | 7 | N/mm² | ISO 37 |
Value | Units | Test Method / Conditions | |
Compression Set (Curing Agent C1, at 22 hours, 175°C) | 5 | % | DIN ISO 815-1 type B method A |
Density (Curing Agent C1) | 1.15 | g/cm³ | DIN EN ISO 1183-1 A |
Elongation (at break, Curing Agent C1) | 280 | % | ISO 37 Type 1 |
Rebound Resilience (Curing Agent C1) | 63 | % | ISO 4662 |
Shore Hardness A (Curing Agent C1) | 62 | — | DIN ISO 48-4 |
Tear Strength (Curing Agent C1) | 15 | N/mm | ASTM D 624 B |
Tensile Strength (Curing Agent C1) | 8.2 | N/mm² | ISO 37 Type 1 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg and 540 kg cardboard packaging.
Storage & Handling
- Storage Information
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.