Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Specific Features
- Crosslinker
- Emulsions
Applications & Uses
- Compatible Polymers & Resins
- Coating Type
- Applications
WACKER® CROSSLINKER V 72 is compounded with Silicone Catalyst Emulsions and Dehesive® Emulsions. It used to produce release liners especially on filmic substrates.
- Application Details
Processing
- Prepare the water quantity in a clean container while stirring slowly.
- Add the Dehesive(R) polymer Emulsion directly to the tank and mix at moderate shear.
- In a next step add the crosslinker emulsion and continue mixing moderatedly.
- Add the Catalyst–EM in the last step and mix at moderate shear to achieve a homogeneous bath. Please take care of perfect homogenization while adding the Catalyst-EM.
Avoid local concentration peaks and catalyst poisons.
Properties
- Typical Properties
- Properties
- Superior curing allows for low platinum formulation
- Easy mixing and metering
- Good release stability
- Good bath life
- Excellent wetting properties
| Value | Units | Test Method / Conditions | |
| Content | 38 | % | — |
| Density (at 20°C) | approx. 1 | g/cm³ | DIN 51757 |
Safety & Health
- Safety Notes
Siloxane Crosslinker Emulsions should never get into direct contact with concentrated Siloxane Catalyst Emuslions or Alkaline Systems, since this may cause a spontaneous, uncontrolled emission of hydrogen. The formation of hydrogen might lead together with air to the explosive mixtures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Store in a dry and cool place. Silicone emulsions are not freeze/thaw stable.