Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Specific Features
- Additive
- Heat resistant
Applications & Uses
- Use Level
- 2%
- Application Details
ELASTOSIL® AUX STABILIZERs H are used to extend the service life of silicone elastomers at temperatures above 170°C. The maximum recommended service temperature for use of ELASTOSIL® AUX STABILIZER H2 is 250°C.
Processing
- ELASTOSIL® AUX STABILIZER H2 is incorporated into ELASTOSIL® R and R plus high-consistency rubber using common mixing techniques. Good results are obtained by incorporating the curing agent at the same time.
- The recommended dosage of ELASTOSIL® AUX STABILIZER H2 is 2 %. Increasing the recommended dosage does usually not further improve the heat resistance of the compound.
- At high concentrations of ELASTOSIL® AUX STABILIZER H2 a slightly decrease in hardness values may be observed for compounds of silicone bases with high Shore A hardness values.
Properties
- Physical Form
- Properties
- Thanks to its paste character, ELASTOSIL® AUX STABILIZER H2 can easily be incorporated into ELASTOSIL® R and R plus mixtures on two-roll mills.
- No impairment of ELASTOSIL® R and R plus grades when dosage recommendations are observed.
- Compatible with curing agents ELASTOSIL® AUX CURING AGENT C1, C6 and E as well as ELASTOSIL® AUX BATCH PT 1 and PT 2.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 1.5 kg can and 30 kg pail.
Storage & Handling
- Storage Information
Please store the cardboard boxes in a dry and cool place; not exceeding temperatures >30°C for longer periods of time. Already opened boxes should be tightly closed again to avoid any contamination and sunlight exposure.