Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Special Features
- Addition Curing
- Fast curing at room temperature
- Flowable
- No chemical shrinkage
- Resistance against epoxy resins
- Resistance against polyester
- Two-component
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Cure Method
- Composites End Use
- Plastics & Elastomers End Uses
- Applications
Composite molding
- Application Details
- ELASTOSIL® C 1200 A/B has been especially developed for the professional production of reusable vacuum bags, used for the production of composite parts.
- Due to its shear thinning behavior it will be self leveling, yet not running off vertical surfaces. It's medium term pot-life will allow the use on larger surfaces, still enabling a quick curing of the bag.
Processing
- ELASTOSIL® C 1200 A/B may be processed using a manual or pneumatic gun. It is supplied in a double cartridge and will be applied directly onto the tool.
- For larger amounts it may also be processed using a 2-component mixing and metering machine.
- On larger surfaces it may also be sprayed using compressed air.
- We recommend to post-curing the vacuum bag for 2-3 hours at operating temperature, 220 °C max.
Important Note:
- The platinum catalyst is in component A.
- Only components A and B with the same lot number may be processed together.
Properties
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Low viscosity
- Shear thinning
- Good mechanical properties
- Rapid curing
- Easily remoldable
- Note
Cured properties are Vulcanized after 24 h at 23 °C.
Value | Units | Test Method / Conditions | |
Demoldable | 60 | minutes | — |
Mix Ratio (A:B) | 1:1 | parts by weight | — |
Pot Life | 20 | minutes | — |
Value | Units | Test Method / Conditions | |
Elongation (at break) | 500 | % | ISO 37 Type 1 |
Shore Hardness A | 25 | — | DIN ISO 48-4 |
Tear Strength | 25 | N/mm | ASTM D 624 B |
Tensile Strength | 5 | N/mm² | ISO 37 Type 1 |
Value | Units | Test Method / Conditions | |
Density (at 23°C, Componenet A) | 1.05 | g/cm³ | DIN EN ISO 2811-1 |
Density (at 23°C, Componenet B) | 1.05 | g/cm³ | DIN EN ISO 2811-1 |
Dynamic Viscosity (Component A, at 23°C) | 20000 | mPa·s | ISO 3219 |
Dynamic Viscosity (Component B, at 23°C) | 20000 | mPa·s | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Note
Components A and B of the addition-curing grade ELASTOSIL® C 1200 A/B contain only constituents that over many years have proved to be neither toxic nor aggressive. Special handling precautions are therefore not required, i.e., only the general industrial hygiene regulations apply.
Packaging & Availability
- Country Availability
- Regional Availability