company tower banner
Wacker Chemie AG Company Logo

ELASTOSIL® Color Paste FL Green RAL 6010

ELASTOSIL® Color Paste FL Green RAL 6010 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

Brand: ELASTOSIL (230 products)

Functions: Pigment

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Materials Features
Specific Features
  • Additive
  • BfR compliant
  • FDA compliant
  • Low volatile
  • Medical

Applications & Uses

Plastics & Elastomers End Uses
Use Level
2%
Application Details
  • ELASTOSIL® COLOR PASTE FL GREEN RAL 6010 has been developed particularly for coloring addition-curing ELASTOSIL® LR liquid silicone rubber and ELASTOSIL® RT RTV-2 silicone rubber.
  • ELASTOSIL® COLOR PASTE FL GREEN RAL 6010 may be used for coloring silicone parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" and “IX.
  • Pigments for coloring plastics" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances.
  • A statement regarding biocompatibility according to USP class VI and selected tests of ISO 10993 is available on request. Please note that biocompatibility testing has been performed for post-cured LSR test specimen containing 4 % color paste.

Processing

Before using ELASTOSIL® COLOR PASTES FL, the paste must be thoroughly stirred. This is also required if there has been a long interruption in production. It may be necessary to repeat this procedure in case of very long production runs. Depending on the color intensity desired, 0.5 to 4.0 % pigment paste should be added, the usual dosage being 2%. Generally, the dosage should be kept at a minimum. In individual cases, an excess of color paste may slow down the curing characteristics. Customers may produce other colors by mixing pigment pastes. Suggestions for formulations can be provided on request.

Properties

Color
Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Coloristical Properties (a* Value)-17-DIN 5033
Coloristical Properties (b* Value)21-DIN 5033
Coloristical Properties (L* Value)47-DIN 5033
Density1.46g/cm³DIN EN ISO 1183-1 A
Dynamic Viscosity (Shear rate 1 s⁻¹)106000mPa·sDIN EN ISO 3219
Dynamic Viscosity (Shear rate 10 s⁻¹)35000mPa·sDIN EN ISO 3219
Properties

ELASTOSIL® COLOR PASTE FL GREEN RAL 6010 is pourable and ready-to-use after stirring up. A dilution is not required. The colors have generally a good resistance to sunlight, UV and hot air. The resistance should be checked for individual cases, especially for long term applications. If the dosage recommendations are followed, the mechanical properties of the colored vulcanizates will not be significantly impaired.

Note
  • Density Cure conditions: 15 min / 100°C evacuated, without press
  • Color Cure conditions: 2% in LR 3003/50, 5 min / 165°C in press
  • Color Measurement conditions: CIE 1976 D65, 10°, d/8

Regulatory & Compliance

Packaging & Availability

Country Availability
Packaging Type
Regional Availability
  • Africa
  • Asia
  • Europe
  • Latin America
  • Middle East
  • North America
  • Oceania
Packaging Information

This product is available in 20 kg pail and 1kg tin.