Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Ready-to-Use Product Features
- Specific Features
Electrically conductive
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Applications
Molded Parts
- Application Details
Control elements for cable accessories, contacts and keypads, interconnectors, electrically conductive rollers, electrodes.
Processing
- The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures.
- A homogeneous incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior.
- Pot life is depending on the used peroxide and storage condition.
- IMPORTANT: In order to produce a ready-to-use-compound, an increased concentration of peroxide is needed.
- ELASTOSIL® R 570/50 OH can be crosslinked with 1.7% crosslinker C1 or with 1.5% crosslinker C6. Crosslinker E is not suitable!
- Processing by press molding or extrusion and curing by cure vapor (CV). Post curing for 4h at 200°C is necessary.
Properties
- Cured Properties
- Properties
- This product is electrically conductive and shows a low volume resistivity.
- ELASTOSIL® R 570/50 OH is not suitable for vulcanisation using crosslinker E.
- This product can be used within a temperature range of - 55°C to + 210°C.
- Note
Cure conditions (post-cured 4 h / 200°C): 1.7 % ELASTOSIL® AUX Crosslinker C1 (Dicumylperoxide), 15 min / 165°C in press.
Value | Units | Test Method / Conditions | |
Compression Set (Curing Agent C1, at 22 hours, 175°C) | 37 | % | DIN ISO 815-1 type B method A |
Density (Curing Agent C1) | 1.11 | g/cm³ | DIN EN ISO 1183-1 A |
Elongation (at break, Curing Agent C1) | 370 | % | ISO 37 Type 1 |
Rebound Resilience (Curing Agent C1) | 52 | % | ISO 4662 |
Shore Hardness A (Curing Agent C1) | 52 | — | DIN ISO 48-4 |
Tear Strength (Curing Agent C1) | 14 | N/mm | ASTM D 624 B |
Tensile Strength (Curing Agent C1) | 7.9 | N/mm² | ISO 37 Type 1 |
Volume Resistivity (Curing Agent C1) | 8 | Ohm-cm | IEC 62631-3-1 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg and 540 kg cardboard packaging.
Storage & Handling
- Storage Information
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.