Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Industrial Additives Functions
Features & Benefits
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Fluids & Lubricants Type
- Industrial Additives End Use
- Use Level
- 0.05 - 1 %
- Applications
SILFOAM® SE 2263 prevents foaming (act as an antifoam) and destroys existing foam (acts as defoamer) in a large number of aqueous systems.
It is ideal for systems in which silicones would usually cause problems:- PVC degassing
- Manufacture and processing of polymer dispersions for textiles, paper, paints and surface coatings, as well as adhesives
- Cooling lubricants
- Textile formulations
Processing
- In general we recommend stirring the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm).
- But be cautious: too high shear can break the emulsion.
- The typical dosage is in the range of 0.05 to 1.0 % and is best determined by preliminary tests.
- SILFOAM® SE 2263 can be dosed undiluted, as it is already sufficiently dispersed by its emulsion form.
- If the use of SILFOAM® SE 2263 should be necessary in diluted form, we recommend preparing dilutions by stirring SILFOAM® SE 2263 gently into cold water.
- Dilute solutions should be used up quickly as the more dilute they are, the sooner they tend to separate.
- A 1:1 aqueous dilution remains stable for several days.
Properties
- Color
- Diluent
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 20°C, 1013 hPa) | 1 | g/cm³ | DIN 51757 |
Dynamic Viscosity (at 25°C, Brookfield, spindle 3, 10 rpm) | 2500 | mPa·s | Brookfield |
Emulsifier Type | o/w, Non-ionic to slight Anionic | — | — |
pH (at 20°C) | 5 | — | Indicator strips |
Solid Content | approx. 26 | % | Microwave oven |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
- Minimum temperature allowed during storage and transportation: 0°C
- Maximum temperature allowed during storage and transportation: 40°C