Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Specific Features
- Aminofunctional silicone resin with high amine level
- Dilutable with water
- Easy to use
- Excellent durability
- Low VOC
- Ready to use
- Water-based
Applications & Uses
- Markets
- Industrial Additives End Use
- Applications
- Textile Finishing
- Softeners & Hydrophilic Softeners
- Textiles & Leather
- Application Details
Processing
- WACKER FINISH CT 95 E gives permanent effects even without the addition of a catalyst. Specific curing conditions need not be adhered to if no resins are used.
- WACKER® FINISH CT 95 E can be applied either by padding or by the exhaust method but the finishing liquors should not be subjected to high shear as this might cause instability.
- 5 - 30 g/l WACKER FINISH CT 95 E are recommended for the pad method. For the exhaust method 1 - 3 %, relative to the weight of goods are adequate and the treatment should be carried out at 40 - 50 °C for 15 - 20 minutes. The pH of the liquor should not exceed pH 5. It may need to be adjusted with acetic acid.
- WACKER® FINISH CT 95 E can be applied either alone or together with resins and other finishing agents.
- If WACKER® FINISH CT 95 E is used together with crosslinking agents and other additives, it should be added, in dilute form, after all the other products. (This recommendation applies generally to the processing of all polysiloxanes).
- Higher crease recovery angles and lower abrasion values can be obtained in resin finishes by using WACKER® FINISH CT 95 E. A wide range of händles can be obtained by combining WACKER® FINISH CT 95 E with conventional softening agents and other additives.
Properties
- Typical Properties
- Properties
- WACKER® FINISH CT 95 E is particularly suitable as softener for the impregnation of fibers and textiles.
- WACKER® FINISH CT 95 E imparts a very soft, smooth and elastic touch to woven and knitted fabrics.
- WACKER® FINISH CT 95 E is considered to be the best softening agent for woolen goods and PES knitware.
- WACKER® FINISH CT 95 E improves the wash-and-wear properties the crease recovery angle and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning.
| Value | Units | Test Method / Conditions | |
| Ionogenity | Non-ionic | - | - |
| pH | approx. 5 | - | - |
| Solid Content | approx. 25 | % | Microwave oven |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
- 0.5 kg bottle
- 145 kg drum
- 950 kg IBC
Storage & Handling
- Storage Information
Emulsions showing signs of creaming should be agitated before use to assure uniform consistency.