Products

ME8452-A is an accelerated version of ME8452 for snap-curing applications.This novel silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE'S (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C and is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.

ME7155-AN is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive which exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-100°C.

ME7665-DA is a rapid curing dielectric die-attach thermal adhesive. It contains alumina crystallite of less than 3 micron in particle size. It is a fast curing insulating epoxy adhesive for snap-curing applications. This thixotropic (TI is approx. 4.0) paste is solvent free. It is designed for automated, online bonding processing. ME7665-DA-LV is thermally conductive with less than 20 ppm ionic impurities. It can be dispensed with traditionally pressure-time or more accurately with positive volumetric dispenser. It has medium viscosity and high thixotropic index.

ME8412 is a silver filled, solvent free, electrically and thermally conductive paste. It is designed for automated, online, die attach processing. It is thixotropic and will not sag on vertical surfaces. Designed to meet the hybrid adhesive specification, Mil Std 883; Method 5011.4 in terms of ionic impurities, ME8412 exhibits low outgassing at 125C and passes NASA outgassing requirements.

EG8050 is an electrically conductive, silver filled epoxy which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). Post bake at 100°c or 125°c for 24 hrs using a vacuum or air flow oven is recommended in order to pass NASA outgassing testing. It can be readily reworked at 80-150°C and is ideal for applications such as large area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE.

ME7635-RC is an thermally conductive insulating epoxy adhesive for die-attach applications. This thixotropic paste is solvent free. It is designed for automated, inline bonding processing ME7635-RC is low in ionic impurities (<60 ppm total) and meets all requirements for MIL-Std 883D 5011.4 specification for dielectric adhesive. Fast curing can be achieved from 80°C and higher temperatures.

ME7158 is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The very high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-150°C with torque or peel stress.

ME7159 is a reworkable, diamond filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The ultra high thermal conductivity of this diamond filled material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-100°C.

EG7635 is a alumina filled, electrically insulating and thermally conductive rigid epoxy paste adhesive. While bonding at ambient temperature can be achieved overnight, elevated temperatures will accelerate curing, exponentially. EG7635 high thermal conductivity and high strength makes it excellent for bonding substrates, components and heat sinks where thermal management is critical. It has more than 15 years of proven records of providing bonding to difficult substrates. EG7635 exibits reduced bond strength at 80-100°C for easier rework.

ME 8155-M is a version of ME 8155 modified to provide extra flexibility while maintaining all electrical and bond strength. It is a reworkable, solvent fsilver-filledilled paste that is electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This paste can be used for screen printing and it can be readily reworked at 80-100°C.

ME 8452 is a reworkable, solvent free, pure silver filled, electrically and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked from 80°C to 100°C. It is ideal for applications such as large area die attach and substrate attach because of its ability to bond materials with highly mismatched CTE.

ME 7155-SC4 is a reworkable, alumina-filled, electrically insulating, and thermally conductive epoxy paste adhesive. It exhibits Outstanding flexibility for bonding materials having highly mismatched CTE's. The high thermal conductivity of this material makes it useful as a thermal bridge between surface mount components and substrates where heat dissipation is critical for thermal management. ME 7155-SC4 cures during the reflow soldering of surface mount components. It can be readily reworked at 80-100°C.

ME7155 is a reworkable, alumina filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits not only outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper), but also exhibits high level of uniformity and consistency in appearance and smoothness of texture, yielding potential ease of use and success in applications. The high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. MEZ155 can be readily reworked at 80-1502.

ME8630-RC is an extra fine silver filled 100% solid rapid curing die- attach for finer pitch application. It is a low stress, low temperature curable die-attach adhesive paste. This single component, silver filled paste is electrically and thermally conductive. It is highly thixotropic with outstanding compatibility for bonding different adherends. The relatively medium Tg and modulus made it suitable for bonding both smaller and relatively large devices. ME8630-RC has been designed to eliminate bleeding on both silver plated copper and alloy 42 lead frames. It maintains more than 150 psi bond strength at 250°C for high temperature wire-bonding.

ME7857-SC is a medium viscosity, silicon carbide filled, flexible epoxy for snap curing application. It is a reworkable, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility down to -60°C. Ideal for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The stress-free flexible adhesive maintains good stable bond strength of 100 psi from 150-250°C and has outstanding thermal stability.

ME7863 is a one part, quartz filled cyanate ester die attach adhesive. It was designed for solder-sealed ceramic packages. It can withstand temperatures up to 300°C without thermal degradation. ME7863 has processing characteristics required in high speed automation. Its unique chemistry results in very low moisture absorption, high adhesive strength and low CTE.

ME7156 is a reworkable, alumina filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The high thermal conductivity of this material makes it useful for bonding large area die and components. ME7156 can be readily reworked at 80-100°C. Positive displacement dispensing equipment with ceramic auger is recommended..

ME 8418-SC is a rapid curing version of ME 8418-FP-LV. This silver filled paste is solvent free, electrically and thermally conductive. It is designed for automated, online die attach processing.

ME 8630-SSC is a ultra-fast curing with extra fine silver filled for finer pitch application. It is a low stress, low temperature curable die-attach adhesive paste. This single component, silver filled paste is electrically and thermally conductive. It is highly thixotropic with outstanding compatibility for bonding different adherends. The relatively medium Tg and modulus made it suitable for bonding both smaller and relatively large devices. Wire-bonding at temperatures as high as 250°C is easily achievable. ME 8630-SSC has been designed to eliminate bleeding on both silver plated copper and alloy 42 leadframes.

EG8050-LV is an electrically conductive, silver filled epoxy which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). It can be readily reworked at 80-150°C and is ideal for applications such as large area die attach and substrate attach because of it's ability to bond materials with highly mismatched CTE.

ME8155 is a silver filled paste, reworkable, solvent free, and electrically and thermally conductive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This paste can be used for screen printing and it can be readily reworked at 80-100°C.

EG7658 is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive. It which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (ie., alumina to aluminum, silicon to copper). The high thermal conductivity and flexibility make it excellent for bonding high-powered, large area die and components. EG7658 can be reworked using temperatures higher than the cure temperature from 80-150°C to soften the bond line. Use a tool adequate to break the bond and remove. Clean any residue with a solvent which will not damage the parts.

ME8650-RC is designed for needle dispensing and screen-printing processing. This silver filled conductive die-attach adhesive can be rapidly cured at low temperatures. This single component, silver filled paste is ambient storable electrically and thermally conductive. It is highly thixotropic with minimal sag. ME8650-RC has been designed to minimize bleeding on both silver plated copper and alloy 42 lead frames. Maintains more than 100 psi bond strength at 250°C for wire-bonding.

EG7655 is a reworkable, alumina filled, electrically insulating and thermally conductive epoxy paste adhesive which exhibits outstanding flexibility for bonding materials with highly mismatched CTE'S (i.e., alumina to aluminum, silicon to copper). EG7655's high thermal conductivity and flexibility make it excellent for bonding large area substrates, components and heat sinks where thermal management is critical. EG7655 exhibits reduced bond strength at 80-100°C for easier rework. The cured adhesive is flexible with Type A hardness of 80 and tensile elongation of more than 30%.

ME 7650-RC is a low viscosity version of ME7150 for snap curing applications. It is a reworkable, unfilled, electrically insulating, and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The stress-free flexible characteristic of this material makes it useful for bonding high-powered, large area dies and components. ME 7650-RC can be cured rapidly at 150-180°C for approximately 60 seconds without creating voids. It can be readily reworked at 80-100°C.

ME8550-DA is a die attach epoxy paste adhesive designed for needle dispensing and screen-printing processing. This silver filled conductive die-attach adhesive can be rapidly cured at low temperatures.This single component, silver filled paste is electrically and thermally conductive. It is thixotropic with minimal sag. ME8550-DA has been designed to eliminate bleeding on both silver plated copper and alloy 42 leadframes.