Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Specific Features
- Polymer
- Solvent-based
Applications & Uses
- Applications
- Coating Type
- Applications
Release Coatings
- Application Details
DEHESIVE® 811 may be used for coating of PE-laminated paper, polyester films (PET) and papers.
Processing
Generally DEHESIVE® 811 is diluted to give a formulation with an active substance content of about 5 %. However, depending on the substrate and coater system, DEHESIVE® 811 may be used with lower or higher active substance contents. Batches of coating compound must be prepared in the order given below.
- First pour in DEHESIVE® 811
- Add solvent and stir slowly until the mixture is homogeneous
- Thoroughly stir in Crosslinker V 24 to this mixture
- Thoroughly stir Crosslinker V 84 to this mixture
- Slowly stir in catalyst C 80
Suitable solvents are aliphatic and aromatic hydrocarbons (e.g. toluene, white spirit), esters and ketones. The cure speed depends on the formulation, type of substrate, quality of solvent, the chosen temperature and the effectiveness of the oven. Laboratory trials are recommended prior to using the material in production in order to verify that the vulcanization performance suits the intended application.
Properties
- Typical Properties
- Properties
- Low COF
- Good release stability after post cure
- Good bath life
- Excellent anchorage to a wide variety of substrates
- Excellent anchorage to polyester films
- Suitable for coating PP and PE films and PE-coated paper
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 0.9 | g/cm³ | — |
| Dynamic Viscosity (at 25°C) | approx. 12000 | mPa·s | — |
| Flash Point | 6 | °C | DIN 51755 |
| Ignition Temperature | min. 280 | °C | DIN 51794 |
| Solid Content | 30 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Packaging & Availability
- Country Availability
- Regional Availability