Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Coating Type
- Applications
- Industrial Textiles
- Sleevings
- Application Details
ELASTOSIL® LR 6260 A/B is a liquid silicone rubber with low viscosity to produce textile coatings. It is especially well suitable for the manufacturing of electrical sleevings.
Processing
- ELASTOSIL® LR 6260 A/B is processed by thorough mixing of component A and B in a ratio of 1 : 1.
- Recommended curing conditions: 3 min at 150°C or 1 min at 180°C.
- Adhesion of ELASTOSIL® LR 6260 A/B depends on substrate and can be improved with additives (e.g. CATALYST C05 or adhesion promoters). Preliminary testing should be carried out to determine optimum formulation and cure conditions.
Properties
- Physical Form
- Typical Properties
- Cured Properties
- Uncured Properties
- Properties
High electric strength
| Value | Units | Test Method / Conditions | |
| Pot Life (at 23°C) | 3 | Days | — |
| Value | Units | Test Method / Conditions | |
| Density | 1.17 | g/cm³ | DIN EN ISO 1183-1 A |
| Dielectric Strength (1mm sheet) | 23 | kV/mm | IEC 60243-1 |
| Dissipation Factor (tan δ, at 50Hz) | 100 × 10⁻⁴ | — | IEC 62631-2-1 |
| Elongation (at break) | 380 | % | ISO 37 Type 1 |
| Oxygen Index (LOI) | 26 | % | ASTM D 2863 |
| Permittivity (at 50Hz) | 3.2 | — | IEC 62631-2-1 |
| Shore Hardness A | 39 | — | DIN ISO 48-4 |
| Tear Strength | 8.9 | N/mm | ASTM D 624 B |
| Tensile Strength | 5.1 | N/mm² | ISO 37 Type 1 |
| Volume Resistivity | 1.1 x 10¹⁵ | Ohm-cm | IEC 62631-3-1 |
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (at 10 rpm, Component A) | 100000 | mPa·s | Brookfield |
| Dynamic Viscosity (at 10 rpm, Component B) | 100000 | mPa·s | Brookfield |
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg pails, 220 kg drum kits and 930 kg IBCs.
Storage & Handling
- Storage Information
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulfur or phosphorus compounds.