Devices & Assemblies

LNP™ ELCRES™ EXL9334U is based on polycarbonate (pc) siloxane copolymer resin, featuring excellent UV resistance. It is UL94 V0 rated at 1.5mm for flame retardancy using non-bromine, non-chlorine FR systems. This medium-flow, opaque material is suitable for injection molding and sheet extrusion applications. It offers extreme low-temperature ductility at -40°C and excellent processability, with opportunities for shorter injection molding cycle times compared to standard PC. Available in a wide range of opaque colors, it is targeted for a variety of applications.

LNP™ ELCRIN™ EXL8452TCC is a polycarbonate (pc) siloxane copolymer resin with 50% post-consumer recycled (pcr) content, designed for transparent injection molding applications. This resin offers excellent low-temperature ductility (-20~-30 °C), along with medium flow characteristics and exceptional processability, potentially reducing injection molding cycle times compared to standard PC. Available in transparent and opaque colors, this is a versatile product suitable for a broad range of applications.

LNP™ ELCRIN™ EXL8281TCC is a polycarbonate (pc) siloxane copolymer resin with 75% post-consumer recycled (pcr) content, designed for transparent injection molding applications. This resin offers excellent low-temperature ductility (-10~-20 °C), combined with medium flow characteristics and outstanding processability, potentially reducing injection molding cycle times compared to standard PC. Available in both transparent and opaque colors, this is a versatile product suitable for a wide range of applications.

LNP™ ELCRIN™ 6XEUIQ2RCC (also known as ELCRIN ER011567) is based on polycarbonate (pc) and polybutylene terephthalate (pbt) alloy, utilizing iQ PBT generation 2 technology with a minimum of 42% post-consumer recycled (PCR) content. This material offers excellent low-temperature impact strength, good surface esthetics, and good chemical resistance.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

LNP™ ELCRIN™ DMX1234RCC is an improved scratch-resistant polycarbonate copolymer containing 25% post-consumer recycled content. This standard flow, UV-stabilized, custom-colorable resin is unreinforced and features excellent scratch resistance, impact resistance, and weatherability with no PFAS intentionally added. Suitable for injection molding, it is ideal for a variety of applications, including automotive interiors, sport/leisure, personal accessories, home and commercial appliances, electrical devices and displays, and electrical components and infrastructure.

SABIC's Specialties Business ULTEM™ Resin 1010 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C and improved flow. Its features include excellent mechanical, electrical, and dimensional properties up to high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings as well as aerospace FAR 25.853 compliance. ULTEM™ Resin 1010 is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance for colored variants needs to be checked on a case-by-case basis. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability.

Transparent Polyetherimide blend. ECO Conforming. US FDA and EU Food Contact Compliant in recognized colors.