Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Specific Features
- Product Rheology: Self-leveling
- Regulation: MIL-A 46106 grade
Applications & Uses
- Markets
- Application Area
- Cure Method
- Applications
- Appliances Industry
- DO NOT USE Small Appliances
- Household Applications
- Small Appliances
- Application Details
General purpose sealant and adhesive.
Processing
ELASTOSIL® E50 TRANSPARENT shows good primerless adhesion to many substrates. We recommend to run preliminary tests to optimize conditions for the particular application.
Properties
- Color
- Typical Properties
- Cured Properties
- Uncured Properties
- Properties
- Acetic acid-curing system
- Flowable
- Solventless
- Excellent primerless adhesion to many substrates
| Value | Units | Test Method / Conditions | |
| Curing Time (at 23°C, 50% RH) | 12 | h/mm | — |
| Skin-forming Time (at 23°C, 50% RH) | 10 - 15 | min | — |
| Value | Units | Test Method / Conditions | |
| Density (in water, at 23°C) | 1.09 | g/cm³ | DIN EN ISO 1183-1 / ISO 2781 |
| Elongation (at break) | 150 | % | ISO 37 Type 1 |
| Shore Hardness A | 35 | — | DIN ISO 48-4 |
| Tensile Strength | 1.5 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (at 20°C) | 1.08 | g/cm³ | DIN EN ISO 1183-1 A |
| Dynamic Viscosity (at 23°C, 2.5 rpm) | 50000 | mPa·s | Brookfield |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Compliance
Tests according to the United States Military Standard (MIL-SPEC): Wacker Chemie AG performs all test referring to MIL Spec according to its current test methods, lab conditions, quality methods, procedures, sampling, packaging, and so forth. These test methods, lab conditions, quality methods, procedures, sampling, packaging, and so forth need not necessarily be identical with the test methods, lab conditions, quality methods, procedures, sampling, packaging, and so forth listed in the above-mentioned specification. Compliance with the above-mentioned MIL Spec is limited to certain properties (excluding heat resistance as mentioned in MIL-A-46106, Group III, Type II) and does not imply or state conformity to any other aspect of the referenced specification, including but not limited to sampling, marking, packaging, bar coding, testing, or sampling.
Safety & Health
- Safety Notes
During vulcanization of ELASTOSIL® E50 TRANSPARENT, a total of 3% by weight of acetic acid is split off. These vapors should not be inhaled for long periods or in high concentration. Work areas should therefore be well ventilated. Contact of unvulcanized silicone rubber with eyes and mucous membranes must be avoided as this would cause irritation. However if it does happen, rinse the affected area thoroughly.
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 21 kg pails and 210 kg drums.